The Best Metal-Cutting Saws of 2023

Photo: amazon.com

Sawing through metal by hand is hard work! A hacksaw can tackle occasional small jobs, but for larger pieces or if you cut metal on a regular basis, a power tool is the more sensible solution.

However, the wide variety of metal-cutting chop saws, band saws, and circular saws on the market make finding the right choice a challenge. In this guide, we’ll help clarify the options available, discuss the key technical features of each type, and offer our suggestions for the best metal-cutting saw in the popular categories.

BEST OVERALL: DeWalt DW872 14″ Multi-Cutter Saw
RUNNER-UP: Makita LC1230 12″ Metal Cutting Saw
BEST BANG FOR THE BUCK: Porter-Cable PCE700 14″ Chop Saw
BEST DIY: Evolution RAGE4 Multi-Material Cutting Chop Saw
BEST PORTABLE: WEN 94396 5-Inch Handheld Portable Band Saw for Metal
BEST CIRCULAR: Milwaukee M18 Fuel Metal Cutting Circular Saw
BEST HEAVY-DUTY: Shop Fox W1715 3/4 HP Metal Cutting Bandsaw

Photo: amazon.com

Finding the best saw for cutting metal isn’t as straightforward as it might seem. Different sizes, power options, and cutting capacities are available. Also consider how it will be used: Will the tool be in a workshop, or should it be portable? First, consider the differences in the three main types of metal-cutting saws. To get the right combination of both performance and value, take the following considerations into account.

Blade Type and Size

The two main types of tools for cutting metal are chop saws and band saws, and they have different types and sizes of blades.

Chop saws, with a rise-and-fall action similar to a woodworking miter saw, have either a toothed blade or an abrasive wheel (often called a cut-off wheel). Most toothed blades have carbide-tipped teeth, which stay sharp longer. They outlast abrasive cut-off wheels, though the latter are considerably cheaper. The diameter of the blade or cut-off wheel can range from 7¼ inches to 16 inches. This size has a big impact on the maximum cutting thickness, though individual machine specifications should always be checked.
Band saws, which range from handheld portable models to heavy-duty workshop tools, have a continuous steel ribbon with teeth along one edge. While the length of a band saw blade is fixed, both width and teeth per inch (TPI) can vary. Wider blades are stiffer and used for straight cutting, whereas thinner, more flexible blades can cut curves. A blade with fewer teeth cuts more quickly, while blades with more teeth can create a smoother finish.

Angled Cuts and Fence Adjustment

Chop saws get their name from the rise and fall of the blade. Unlike a woodworking miter saw, the blade cannot be rotated or tilted. Instead, a rotating fence is fitted, and the workpiece is clamped against it at the required angle.

Handheld metal-cutting band saws typically are used for making pipework or cutting rebar. In theory, they can cut at any angle, but their freehand nature can make it difficult to maintain accuracy. Workshop versions of this saw can offer great versatility, either with a rise-and-fall action similar to a chop saw or by using a flat table to support the workpiece, which is then fed into the blade.

Motor Power and Source

Since it’s the maximum available from a standard electrical outlet, corded motors are often restricted to 15A (amps) of power, so workshop models often have a motor of this size. More portable saws are frequently 10 amp-hours, which are, strictly speaking, less powerful but still able to deliver a good performance. Heavy-duty models are frequently assigned a horsepower rating rather than amp-hours, and a dedicated circuit is sometimes required to run them.

The power for cordless metal-cutting saws is rated in volts (V) instead of amps, which describes the battery capacity. Light-duty 12-volt models are the smallest, 18-volt or 20-volt models are the most common, and powerful 36-volt tools are now available.

Vise Adjustment and Blade Change

Chop saws and workshop band saws feature a vise for securely clamping the work during cutting. Unlike a standard vise that has two jaws, most have a single jaw that closes against the fence. The distance the jaw can open defines the maximum size of workpiece that it can accommodate. Quick-release mechanisms are a convenient addition on many of these saws.

Blade changing is straightforward on chop saws, which usually have a way of preventing rotation while the main nut is loosened and a new blade fitted. Band saws are a bit more involved because blade tension and tracking must be set, but it’s not a difficult task.

Safety

Chop saws invariably have blade guards that expose the minimum amount of blade necessary to cut metal while offering maximum protection for the operator. Spark deflectors are also common, but while they do a good job of suppressing most of the material thrown off, users should still wear safety goggles or glasses.

The design of a band saw makes it impractical to have a full blade guard, so a length of blade remains exposed at all times. Extra care must be taken when using these tools.

Trigger locks, another important safety feature, help prevent accidental operation. Some handheld metal-cutting saws have a soft start, which reduces the initial torque when the trigger is pulled, thus making them easier to control.

Portability

Ease of transporting a metal-cutting tool depends largely on the type of saw. Handheld band saws and metal-cutting circular saws, which are similar to their woodworking counterparts, are usually light and very portable.

Chop saws vary in weight, so we considered models that weigh from 19 pounds to more than 50 pounds. That’s still fairly movable, but weight might be a factor if the tool must be taken to and from a jobsite every day.

Heavy-duty workshop band saws can weigh 100 pounds or more, so they aren’t typically considered portable. Some, however, have wheels to move them around if necessary.

Additional Features

Metal-cutting tools may have few design specs and extra features to make them easier and more convenient to use.

The best metal chop saws have big handles that allow easy access for a gloved hand and are comfortable to use for long periods.
A shaft lock allows blade changing with a single wrench.
Some chop saws have chip trays to collect waste and make cleanup easier.
Variable speed on band saws allows the user to match the cutting rate to the type of material for more efficient sawing.
On cordless tools, a brushless motor offers greater battery efficiency than brushed motors.
With a circular saw, it can be difficult to see where the blade is actually cutting, so some models have laser guides that project forward. More basic models simply contain a guide arrow on the bottom plate.

Our Top Picks

Now that you’ve learned about the differences in the types of metal-cutting tools and their features, it’s time to check out some of the best models on the market.

Photo: amazon.com

The DeWalt DW872 is a frequent favorite in independent reviews of the best chop saw for metal. The powerful 15-amp-hours motor combines with a 66-tooth carbide-tipped blade to provide fast, clean cutting of steel, aluminum, copper, and other metals, as well as plastics, composites, and wood.

The DW872 has a class-leading cutting capacity of up to 5 3/16-inch diameter in solid bar or 6½ inches by 4½ inches in rectangular stock. Users can create bevels of up to 45 degrees using the adjustable fence, and the clamp has a quick-release lever.

At 47 pounds, the chop saw is fairly portable while also being sturdy, though the pressed steel base isn’t quite as rigid as some cast versions. The blade guard is plastic. There is neither a chip tray nor a spark deflector, but since the DeWalt produces very few sparks, this isn’t really an issue.

Product Specs

Power: 15 amp-hours corded
Speed: 1,300 rpm
Weight: 47 pounds

Pros

Renowned DeWalt quality
66-tooth carbide-tipped blade
Minimal heat buildup

Cons

Premium price
No chip collection

Get the DeWalt metal-cutting saw at Amazon or Acme Tools.

Photo: homedepot.com

Another popular, high-performance choice, this Makita model has a blade slightly smaller than the DeWalt, with a maximum cut of 4½ inches. However, the 60 carbide-tipped teeth provide fast cutting and a smooth finish through a wide variety of metals. The base is a solid aluminum casting, and the blade guard is steel, although it produces very few sparks.

While several chop saws have a quick-release clamp for fast, repetitive cutting, the Makita also boasts a quick-release fence for rapid setting of different angles. Quick-and-easy blade changing requires a socket wrench, but it’s included. A pair of safety goggles also comes with the saw. Although a chip tray is provided, it catches very little. The Makita chop saw makes a useful light- to medium-duty tool, but for DIY users, it’s a significant investment.

Product Specs

Power: 15 amp-hours corded
Speed: 1,700 rpm
Weight: 42 pounds

Pros

Rigid, durable build
60-tooth carbide-tipped blade
Safety goggles included

Cons

Ineffective chip tray
Expensive for DIY users

Get the Makita metal-cutting saw at Amazon, The Home Depot, or Acme Tools.

Photo: amazon.com

At first glance, it’s difficult to see why the Porter-Cable chop saw is so affordable. Its overall construction is sturdy, and it has a powerful 15-amp-hours motor. It features an adjustable fence for cutting angles at up to 45 degrees and a quick-release clamp. The spark deflector protects the user and provides a clear view of the cut line.

The big difference in this chop saw is its abrasive wheel. While it runs at 3,800 rpm (revolutions per minute), the actual cutting speed is considerably slower than with a toothed blade. Additionally, while replacement wheels are a fraction of the cost of a tungsten carbide blade, they wear out much more quickly. So while the maximum cut is stated at 5 inches, it quickly reduces with regular use. Abrasive wheels also produce a lot of sparks. Still, the Porter-Cable’s price makes it a worthy option for home welders and engineers who don’t need high precision.

Product Specs

Power: 15 amp-hours corded
Speed: 3,800 rpm
Weight: 32 pounds

Pros

Reliable
Comparatively lightweight
Affordable

Cons

Abrasive wheel could be better
Lacks precision

Get the Porter-Cable metal-cutting saw at Amazon, The Home Depot, or Acme Tools.

Photo: amazon.com

DIYers in the market for a multipurpose saw may wish to check out the Evolution Rage4. It’s a well-made, sturdy tool with an adjustable fence and quick-release clamp. The 10-amp-hours motor isn’t as powerful as some, but it’s a good match for the 7¼-inch tungsten-tipped blade.

Thanks to its remarkable versatility, the blade is the star here. It can make accurate cuts in ferrous and nonferrous metals, plastic, PVC, composites, and wood. The maximum thickness in steel plate is only ¼ inch, but it saws through a box section at up to 5 inches across.

The saw generates very little heat and few sparks. At just 19 pounds, it’s highly portable and easy to store, making it a good choice for a small workshop with limited space.

Product Specs

Power: 10 amp-hours corded
Speed: 3,500 rpm
Weight: 19 pounds

Pros

Very versatile
Light and portable
Relatively inexpensive

Cons

Light duty only
Modest capacity

Get the Evolution Rage4 metal-cutting saw at Amazon, The Home Depot, or Tractor Supply Co.

Photo: amazon.com

WEN has a reputation for producing durable tools at competitive prices, and the company’s handheld portable band saw is a good example. It contains a reliable 10-amp-hours motor that drives a 10/14-TPI variable pitch blade suitable for a variety of materials. Users can adjust the speed, so the feed rate can be optimized for metals ranging from aluminum to cast iron. It can complete a maximum cut of 5 inches.

Ball-bearing guides help ensure smooth cutting, and an external lever simplifies blade tensioning. A rubberized grip offers room for a gloved hand, and an auxiliary handle at the front provides a sure hold.

At under 15 pounds, it’s light, but that’s because it contains quite a lot of plastic. Although the saw isn’t fragile, it might suffer damage in tough jobsite environments. Reports also exist of occasional breakdowns, though these seem to be isolated incidents rather than a common problem.

Product Specs

Power: 10 amp-hours corded (20-volt cordless also available)
Speed: Variable: 60 to 420 feet per minute (fpm)
Weight: 14.5 pounds

Pros

Variable speed
Very maneuverable
Useful stand included

Cons

A lot of plastic
Occasional breakdowns

Get the WEN metal-cutting saw at Amazon, The Home Depot, or Walmart.

Photo: amazon.com

Milwaukee makes the cut with its M18 Fuel Metal Cutting Circular Saw, a versatile tool popular with jobsite welders, installation contractors, and sheet-metal workers. It uses a powerful brushless motor that features RedLink Plus electronics to maximize battery life. Unlike brush motors, brushless versions are maintenance-free.

The Milwaukee M18 has the best metal-cutting circular saw blade we’ve seen, with 30 carbide-tipped teeth ideal for tackling angle iron, rebar, sheet steel, and EMT (electrical conduit), among other metals. A wide stainless steel shoe (base plate) provides stability when sawing, and a clear guard offers good cut line visibility. Its 6.5-pound weight and attached 5-amp-hours battery make it very manageable.

It’s difficult to find fault with the Milwaukee M18 Fuel metal-cutting circular saw, but it’s expensive. A battery and charger are not included.

Product Specs

Power: 20-volt cordless
Speed: 3,900 rpm
Weight: 6.5 pounds

Pros

Efficient brushless motor
Very light and compact
Good battery life

Cons

Battery and charger are extra
Expensive

Get the Milwaukee metal-cutting saw at Amazon, The Home Depot, or Acme Tools.

Photo: amazon.com

Shop Fox produces affordable heavy-duty machinery aimed at home and small workshop users. The Shop Fox W1715 metal-cutting band saw has a powerful ¾-horsepower motor with three speed ranges, yet it plugs into a standard 110-volt outlet.

Thanks to the included vertical sawing attachment, the band saw can be used either horizontally or upright. The maximum cut is a 4½-inch diameter in round stock or 6 inches by 4½ inches rectangular. Adjustable clamps allow sawing at any angle. The saw shuts off automatically as soon as the cut is finished.

Some assembly is required, and since it weighs 122 pounds, it’s a job for two people. Once assembly is complete, the wheels on the stand make it relatively easy to move around. Although the Shop Fox W1715 is a significant investment, it’s a good value when compared with similar rivals.

Product Specs

Power: ¾ horsepower, single phase (uses standard 110-volt outlet)
Speed: 78, 108, or 180 fpm
Weight: 122 pounds

Pros

Horizontal and vertical cutting ability
Competitively priced
Wheels and handle for mobility

Cons

2-person assembly recommended
Significant investment

Get the Shop Fox metal-cutting saw at Amazon, Acme Tools, or The Home Depot.

Our Verdict

The DeWalt metal-cutting saw is a superbly made saw, with the best 14-inch carbide metal-cutting blade for general-purpose use we found. However, its price may put it beyond the reach of many amateurs. The Porter-Cable metal-cutting saw doesn’t have the same high-quality feel, but it’s robust, dependable, and quite affordable.

As an engineer, I have extensive experience with metal-cutting saws. The Bob Vila team also researched leading brands and the latest products to make sure we were aware of recent developments. While the technical aspects discussed here are clearly important, several other key factors impacted our choices.

Type: Although lots of different types of metal-cutting saws are available and chop saws are popular among metal workers and welders, they aren’t the best metal-cutting saw to trim rebar set in concrete or saw through metal piping installed in a building. Our goal was to choose models that provide solutions for a variety of different users.
Value: We tried to find metal-cutting saws for every budget, but we never base our choices on price alone. Each of these saws comes from a brand with an established reputation for reliability and durability to ensure long-term value.

Any saw that can cut metal has the potential to be dangerous, but taking a few simple precautions will help prevent accidents.

Read the manufacturer’s instructions carefully. Make sure you understand how the machine works and how to turn it off quickly.
Always wear protective goggles or safety glasses. Cutting metal is usually quite noisy, so wearing ear protection is also a good idea.
Metal can sometimes get hot when being sawed, and cut edges can be sharp. Experts recommend that you wear strong, heat-resistant gloves.
Make sure any guards are in place correctly. Although you may be tempted to remove them for a better view, don’t.
Sparks are often generated when cutting metal. Make sure flammable liquids are well away from the work area.
Securely clamp the item you plan to cut, and never lift a workpiece into a rotating saw blade. If the metal catches or is thrown out, it can cause serious injury. Band saws with vertical tables are an exception, as the workpiece cannot be pulled into the blade.

FAQs

The information in this guide provides a comprehensive explanation of the key features of metal-cutting saws. However, during our research, we came across some general questions, which we address along with their answers below.

Q. What is a saw that cuts metal called?

A hand saw for cutting metal is called a hacksaw. Powered saws are often called chop saws or cut-off saws, but metal-cutting band saws and metal-cutting circular saws also are available.

Q. What is the best saw for cutting metal?

Because some saws are better at particular tasks than others, no single answer exists as to which saw is the best. This article considers the various features and offers a variety of solutions.

Q. How does a cut-off saw work?

A cut-off saw usually has an abrasive disk rather than a toothed blade. It works similarly to an angle grinder, but it’s mounted on a sturdy base, which helps provide stability and improve both control and accuracy.

Q. What is the best cold-cut saw?

Each of the listed metal-cutting saws could be described as a cold-cut saw, because unlike metal-cutting lathes and mills, they don’t use lubricants. However, the term typically refers to chop saws, and the DeWalt and Makita are our favorites.

Q. Can I use any saw to cut metal?

No. Saws designed for cutting wood might be able to cut soft metals like aluminum or brass, but not steel. Even then, manufacturers don’t recommend it because swarf (metal scraps) can damage the motor or other moving parts. It’s wise to follow manufacturers’ recommendations as to the capabilities of their machines.

Q. Can I use a metal-cutting saw to cut wood?

It’s possible, but it depends on the type of saw and the blade fitted. Sawdust tends to clog metal-cutting band saw blades because they have lots of small teeth. Using a saw like the Evolution Rage4 is a multipurpose solution. However, if you cut wood on a regular basis, a dedicated saw is usually a worthwhile investment.